Ozonation – O.Zone Generator

In these systems Ozone is used instead of air in the draw systems. Ozone is a stronger oxidant than air so should  mean oxidation happens faster. The Ozone generator converts the oxygen (O2) in the air to Ozone (O3) which is in turn sucked in and sits on top of the media. The kit can be fitted to Impression PLUS 1” filter systems.

During regeneration, air filters recharge the top portion of the media tank with air. This recharged air oxidizes contaminants in the water, allowing them to be filtered out through the media below. The Ozone Generator activates during the air-draw cycle of regeneration. As air is being drawn into the tank, it passes through an electrical field created by the ozone generator which converts normal oxygen (O2) to ozone (O3).The generated ozone is then drawn into the tank which helps clean the unit of nuisance, slime producing bacteria. The ozone generator will automatically turn itself off after regeneration. While producing ozone, the unit will measure and record the electrical amperage consumed by the generator itself. The alarm feature, if turned on (default is off), will enter into alarm status if a low amperage situation occurs for three consecutive regenerations. This will be  indicated by an alarm and  the control valve will read “Service Ozone.” This indicates the ozone generator is not operating correctly and may need to be adjusted.