Herco Compact Unit UO-D C Simplex Series
Price range: £9,104.00 through £9,803.00
Ready-to-connect system in compact design including pre-treatment for desalination of drinking water according to drinking water regulations (free chlorine not detectable).
Due to integrated water pre-treatment components as pre-filter, backflow preventer, simplex water softener and limitron hardness monitoring unit a piping on site is not necessary. Easiest on site-installation due to only 4 connections (drinking water, permeate, waste water and power socket).
Applications
- Discontinuous water softening and desalination
- Suitable for all commercial and industrial applications with discontinous water demand (e.g. nightly shut-down)
Features
- Skid mounted, complete unit (1130 x 750 x 1520 mm)
- Simplex softener Clack WS1CI 30L mono resins
- RO Digital controller
- Recovery from 75% to 80%
- Salt rejection percentage: min. 97%
- Working pressure: 12 bar
- Voltage: 230 V/50 Hz
- Digital flow meters
General Conditions for Installation
The unit may only be used for the desalination of feed water with drinking water quality or appropriately pre-treated well or surface water. The unit is designed for a salinity (TDS) of 1,000 mg/l and a temperature of 15 °C. Under these conditions, the projected permeate output is achieved even after three years of operation. The permeate yield depends on the raw water quality and the pre-treatment. The following parameters must be maintained in the feed water:
- Free chlorine not detectable
- Iron (Fe) < 0.2 mg/l
- Manganese (Mn) < 0.05 mg/l
- Silica (SiO2) < 25 mg/l
- Silt density index (SDI) < 3
- Feed water temperature 5 – 35 °C
- Feed water pressure 3 – 6 bar
- Pressure fluctuation ± 0.5 bar
Related products
-
-
Herco Vertical Frame Units – UO-D Series
Price range: £9,000.00 through £13,900.00 -
Herco Vertical frame Unit UO-D FU Series
Price range: £13,774.00 through £17,511.00 -
