Atlas UV LED 25L/min unit

The 25 L/min model includes several features:

• Treats up to 25 litres per minute of reverse osmosis (RO) water, or approximately 12–18 litres per minute of conventionally filtered water.
• Flow-activated operation: the UV LEDs switch on automatically when water flow reaches about 3 L/min and switch off when the flow stops, reducing energy use and extending LED life.
• 23 W power consumption.
• 3,000-hour UV LED lifespan.
• ¾-inch BSP threaded connections for higher-flow plumbing systems.
• Operates with water temperatures from 2°C to 65°C.

Like all UV water sterilisers, it:

•  Inactivates bacteria, viruses, and other microorganisms.
• Uses no chemicals and leaves no residual taste or odour.
• Does not remove sediment, chlorine, heavy metals, or dissolved chemicals. Requires reasonably clear water, so it is normally installed after a sediment filter or reverse osmosis system.

If you’re choosing between the three models:

• 7 L/min – best for one drinking-water outlet.
• 15 L/min – suitable for a typical home or small commercial setup.
• 25 L/min – intended for larger homes with high simultaneous water demand or commercial environments where multiple outlets may be used at the same time.