Fleck Simplex 5600

£349.84£703.33

Clear

Description

General

General conditions for Installation
Connection Inlet & Outlet: 3/4” BSPM
Drain Connection *: 1/2” Hose
Electrical Rating: 230-24V / 50 Hz
Power Rating: 8 watts
Minimum Inlet Pressure: 200 kPa ( 2 Bar )
Maximum Inlet Pressure: 700 kPa ( 7 Bar )
Vacuum: Not permitted
Average Pressure Loss **: 100 kPa ( 1 Bar )
Maximum Water Temperature: 43ºc

* Open drain required
It is recommended that a 20pm Pre-cartridge filter be installed prior to the inlet of the water softener

Dimensions in mm

Resin Litres Valve H1 Vessel H2 Vessel B1 Brine Tank H3 Brine Tank B2 Softener Ht Inlet/Outlet
10 186 449 208 780 430 635 3/4″
15 186 904 208 780 430 1090 3/4″
20 186 904 208 780 430 1090 3/4″
25 186 905 233 780 430 1091 3/4″
30 186 905 257 780 430 1091 3/4″
35 186 1124 257 780 430 1310 3/4″
40 186 1124 257 780 430 1310 3/4″
50 186 1387 257 780 430 1573 3/4″
60 186 1235 304 780 430 1421 3/4″
75 186 1374 334 830 670 1560 3/4″

 

Regeneration

Litres of Resin 10 15 20 25 30 35 40 50 60 75
1) Backwash Litres 20 30 40 45 45 75 75 75 105 150
2) Brining + Slow Rinse Litres 30 30 45 30 45 55 85 130 120 160
3) Fast Rinse Litres 20 30 40 75 75 95 95 95 135 150
Total 70 90 125 150 165 225 255 300 360 460

Ion Exchange

Resin Type: Strong acid cation resin – softening, food grade quality
Life Span: 15 years under normal operating conditions
Ion exchange
Litres of Resin 10 15 20 25 30 35 40 50 60
Softener Capacity as CaCO3 200ppm 2.5m3 3.7m3 5.0m3 6.2m3 7.5m3 8.7m3 10m3 12.2m3 15m3
250ppm 2.0m3 3.0m3 4.0m3 5.0m3 6.0m3 7.0m3 8.0m3 10m3 12m3
300ppm 1.6m3 2.5m3 3.3m3 4.1m3 5.0m3 5.8m3 6.6m3 8.3m3 10m3
Salt Consumption kg/reg. 1.2 1.8 2.4 3 3.6 4.2 4.8 6 7.2
Flow rate
Litres of Resin 10 15 20 25 30 35 40 50 60
nominal m3/hr 0.4 0.6 0.8 1.0 1.2 1.4 1.6 2.0 2.4
peak m3/hr 60 litr hour

 

Reviews

There are no reviews yet.

Be the first to review “Fleck Simplex 5600”

Your email address will not be published. Required fields are marked *

TOP